Olympus Studio Instruction Manual page 231

One Touch WB
You can obtain the white balance from the image displayed in the preview area and
register this as a one touch white balance.
Item
Gray Point
Specification
Memory Destination
AF Frame Selection
Select the position of the AF target mark for use during autofocus shooting. Select
the AF area from the pull-down list.
[One Touch WB] dialog box
Click the desired area on the preview image to obtain a gray
point. The average RGB value of the position clicked in the
image is displayed in the R, G, and B items.
• [Eyedropper tool]:
Click this to change the cursor to the eyedropper tool. When
the cursor is placed over the preview image, the average
RGB value for the cursor position is displayed. Click the
desired area on the preview image to obtain a gray point.
• [Redo]:
Click the preview image to reset the average RGB value.
To cancel the gray point specification, perform any of the
following operations.
• Click the [Eyedropper tool] button.
• Click anywhere outside of the preview area.
• Press the [Esc] key.
Select the memory destination of the obtained white balance
from the pull-down list. If you select a memory destination with
a registered white balance, that white balance is overwritten.
Camera settings
Description
231