Table of Contents
Advertisement
Batch Processing
Save in
Open registered
application after
saving
[Cancel]
[OK]
184
You can select the method for saving the files after batch
processing is complete.
• Folder:
Click the [Browse] button to specify the destination of the
image.
• File Name:
Select either of the following naming conventions.
Use file name of original image:
The files are saved with the same names as the image
files for batch processing.
If a different file format is selected in [Format], the files
are saved as separate files with a different extension.
Optional File Name:
Check this box to automatically name and save the file.
You can also click the [File Naming Rule] button to
display the [File Naming Rule] dialog box and set a
rename rule.
• Format:
From the list, specify the format of the image to be saved.
"Saving images" P.195
• Compression ratio:
This can only be specified when [Exif-JPEG] or [JPEG] is
selected as the file format in [Format]. Select [High Quality],
[Standard Quality], or [Low Quality].
• Comments:
Check this box to enter a comment when saving the file.
This box can only be checked when [Exif-JPEG] or [Exif-
TIFF] is selected as the file format in [Format]. This option is
grayed out when another file format is selected.
Check this box to automatically display the completed batch
processing images with the registered application.
"Launching a registered application" P.194
Cancels batch processing.
Starts batch processing with configured settings.
Advertisement
Table of Contents
