Olympus Studio Instruction Manual page 38

Transferring images
• During the image transfer, do not turn off the camera, open the card cover of
the camera, or disconnect the connection cable. Doing so may cause a
malfunction on the camera or a problem with OLYMPUS Studio.
Note
• Do not add or remove a hardware device to or from the computer when the
computer is connected to the camera. Doing so may cause a malfunction on
the camera or a problem with OLYMPUS Studio.
• If an existing file in the transfer destination folder has the same name as one of
the files you want to transfer, the [Overwrite] dialog box appears. In the
[Overwrite] dialog box, you can select one of the following methods for
transferring images.
[Skip]
[Overwrite]
[Add Serial Number] : Adds a serial number to the end of the file name and
[Apply to All]
• If an Olympus USB or IEEE1394 (FireWire) storage class camera is connected
to the computer, both the camera and the media can be specified as transfer
sources.
Tips
38
: Skips this image and transfers the next image.
: Transfers and overwrites the image.
transfers the image with a different name.
: Applies the same image transfer method selected to all
files with the same name.