To Scale And Position Reference Waveforms; To Adjust Reference Waveform Skew - Agilent Technologies InfiniiVision 3000 X-Series User Manual

One reference waveform can be displayed at a time.
See Also
•

To scale and position reference waveforms

1 Make sure the multiplexed scale and position knobs to the right of the
2 Turn the upper multiplexed knob to adjust the reference waveform
3 Turn the lower multiplexed knob to adjust the reference waveform

To adjust reference waveform skew

Once reference waveforms are displayed, you can adjust their skew.
Agilent InfiniiVision 3000 X-Series Oscilloscopes User's Guide
"To display reference waveform information"
[Ref] key are selected for the reference waveform.
If the arrow to the left of the [Ref] key is not illuminated, press the key.
scale.
position.
Reference Waveforms
on page 90
5
89