Specifications - Follett 110 Series Installation & Service Manual

Specifications

Electrical
1. Models with Satellite-fill icemakers (C/E110CR400A/W)
220V/60Hz/1 phase
230V/50Hz/1 phase
2. Freestanding models and models with integral icemakers (C/E110FB400A/W, C/E110CT400A/W)
220V/60Hz/1 phase
230V/50Hz/1 phase
3. Dispensers and Satellite-fill icemakers are supplied with 7-foot power cord
Ambient
Air temp
Water temp
Water pressure
Plumbing
Dispenser drain
Icemaker drain
Dispenser water inlet
Icemaker water inlet
Satellite-fill IM water inlet
Cond. inlet – w/c only
Cond. drain – w/c only
Note: Water shut-off recommended within 10 feet (3m) of dispenser. Drain to be hard piped and insulated, and maintain
slope of at least 1/4" per foot (6mm per 305mm run) of slope. All plumbing connections must be made in accordance with
local building codes.
Ventilation clearances
Countertop models with Satellite-fill icemaker (C/E110CR400A/W) – none. 775mm (12") at top advised for service.
Countertop models with integral icemaker (C/E110CT400A/W) – 153mm (6") at top. 153mm (6") each side advised
for service.
Freestanding models (C/E110FB400A/W) – 102mm (4") at rear. 305mm (12") at top advised for service.
Icemaker
5 amps
5 amps
Total system
6.5 amps
6.5 amps
38°C/100° F max. 10°C/50°F min. (best performance below 27˚C/80˚F)
32°C/90°F max. 4°C min./40°F (best performance below 21˚C/70˚F)
70 P.S.I. max. 10 P.S.I. min.
110CR with
Satellite-fill icemaker
3/4" FPT
3/4" MPT
3/8" FPT
–
3/8" OD push-in
3/8" FPT
3/8" FPT
Dispenser
1.5 amps
1.5 amps
110CT with
integral icemaker
3/4" FPT
3/4" MPT
3/8" FPT
3/8" FPT
–
3/8" FPT
3/8" FPT
4
110FB with
icemaker in base
3/4" FPT
3/4" MPT
3/8" FPT
–
–
3/8" FPT
1/2" FPT