Follett 110 Series Installation & Service Manual page 20

All units
9. Slip supplied hose clamp onto tube and push tube onto exit port of evaporator.
Do not twist hose when securing to evaporator.
!
Only use tubing supplied by Follett Corporation.
10. Fasten tube on port with hose clamp, being sure that clamp is positioned on evaporator side of nozzle flange.
11. Tighten clamp.
ice level control stat
engaging pin
capillary tube
26mm
(1")
ice tube
ice hose mounting bracket
5mm (3/16") ice tube hole
20