Table of Contents
Advertisement
4. Paper
(1) Paper acceptable for the drawer
• Plain paper (64 g/m
• Recycled paper (64 g/m
• Color paper (64 g/m
* Acceptable weight: 64 g/m
* Acceptable sizes: A5R - A3, Folio
* For information regarding setting paper, refer to the Instruction Handbook for your
copier.
(2) Paper acceptable for the stack bypass tray
• Plain paper (64 g/m
• Recycled paper (64 g/m
• OHP transparencies: 25 sheets
• Postcard: 25 sheets
• Envelopes (DL, C5): 10 sheets
* Acceptable weight: 45 g/m
* Acceptable sizes: A5R - A3, Folio
It is additionally possible to set custom size paper other than those sizes noted
above as long as the dimensions of that paper are within:
Width: 98 mm - 297 mm, Length: 148 mm - 432 mm
* When using OHP transparencies, flip through them to separate the sheets before
setting them into the stack bypass tray.
* For information regarding setting paper, refer to the Instruction Handbook for your
copier.
Setting envelopes in the stack bypass tray
Carry out the following procedure when setting envelopes in the stack bypass tray. Be
sure also to enter into the printer's operation panel the size of the envelope as it
corresponds to the envelope type. (Refer to the sizes at right and carry out the follow-
ing procedure to enter the appropriate size in the operation panel of the printer.)
Open the stack bypass tray.
1
2
): 500 sheets
2
): 500 sheets
2
): 500 sheets
2
- 80 g/m
2
2
): 100 sheets
2
): 100 sheets
2
2
- 200 g/m
Envelope Type
Size That Should Be Entered
DL
220 mm x 110 mm
C5
229 mm x 162 mm
11
Advertisement
Table of Contents
