Table of Contents
Advertisement
Chapter 5. Configuration Menu
ALARMS
5-8
Used to initialize the method by which the control port
handles alarm conditions.
TRAPS
Determines if alarm conditions should automatically send
alarm messages (traps) to the controlling PC. The setting is
for this unit, or for slaves if this unit is a master.
Choices: ENA, DISA
OUTPUT
Selects whether the alarm traps (if enabled) are sent directly,
or if the telephone number stored in the ESU LT should be
dialed first (industry-standard AT dial command sent to
modem).
Choices: DIRECT, DIAL
TEL NUM
This is the telephone number which is dialed to obtain alarm
traps. The string can be up to 20 characters in length and is
terminated with a semicolon
character is used to represent a pause in the dial string.
(:)
For example, for number 9:5551212; dial 9, pause
momentarily and then dial 5551212. This pause could be
necessary to access an outside line, such as a PBX.
When editing a specific character, the arrows are used to
scroll from 0 to 9, then colon
telephone number is entered into the ESU LT only upon
pressing
after typing the semicolon.
Enter
Choices: 20 digits (0-9, :, and ;)
The typed digits are accepted only after pressing
ESU LT User Manual
as the last character. A colon
(;)
and semicolon
(:)
Enter
. The new
(;)
.
61200410L1-1
Advertisement
Table of Contents
