Stainless Steel Surround; Control Panel - Miele KM 411 Operating Instructions Manual

Cleaning and care

Stainless steel surround

Clean the stainless steel surround with
hot water and a little washing up liquid
applied with a soft sponge. Wipe dry
using a soft cloth. Soak stubborn soiling
first to loosen it.
Stainless steel surfaces can be cleaned
using a Miele E-Cloth or a proprietary
non-abrasive cleaning agent designed
specifically for use on stainless steel.
To help prevent re-soiling, a proprietary
conditioning agent for stainless steel,
such as Neoblank (available from the
Miele Spare Parts Department) can also
be used.
Follow the manufacturer's instructions
on the label and apply sparingly with an
even pressure following the direction of
the grain.
20

Control panel

Clean the surface and control with a
damp cloth only, and then wipe dry.
For the glass control panel you can use
a proprietary glass cleaning agent
afterwards. Follow the manufacturer's
instructions.