Stainless Steel; Ledge; Built-In Frame; Ceramic Surface Of The Browning Unit - Miele SALAMANDER GRILL CS 1421 Operating And Installation Instructions

Care and cleaning

Stainless steel

Use a non-abrasive stainless steel
cleanser for cleaning the appliance. To
help keep the appliance clean longer,
we recommend using a stainless steel
care product (see "Optional
accessories"). Apply the product
sparingly, using a soft cloth.
Do not use stainless steel cleanser
on areas where there is printing. It
will rub away the printing. Instead,
use a soft sponge with some dish
liquid and warm water to clean
printed areas.

Ledge

Clean the ledge after each use, with a
soft sponge, some dish washing liquid
and warm water. Pre-soak any stubborn
residue before cleaning. Dry all
surfaces with a soft cloth.
Note: The ledge is not dishwasher
safe.
The ledge can be removed for easier
cleaning of the ledge and the
underlying frame.
When re-inserting the ledge, check that
it is positioned correctly. If it is not
positioned correctly, the browning unit
will not lower completely.
14

Built-in frame

Clean the built-in frame regularly.
Always promptly remove food spatters
and liquids. Clean the frame with a soft
cloth, some dish detergent and warm
water, and then dry with a soft cloth.
Ceramic surface of the
browning unit.
First, remove any coarse residue with a
damp cloth.
Next, clean the surface with a special
cleaner for glass ceramic and stainless
steel (see "Optional accessories"), on
paper towel or a clean cloth. Do not
apply cleaner while the surface is still
hot, as this can leave spots. Follow the
instructions indicated by the
manufacturer of the cleaning product.
Finish by rinsing the ceramic surface
with a damp cloth, then dry. Be sure to
remove all cleaning product residue.
Failure to do so can cause residue to
burn into the surface during
subsequent use, damaging the
ceramic.