Advertisement
Building in
The appliance can be installed into a
kitchen run. To match the height of the
rest of the kitchen the appliance can be
fitted with a suitable top box
A ventilation gap of at least 50 mm
depth must be allowed for behind the
appliance for air to circulate.
The cross section of the air outlet must
be at least 300 cm
can circulate without hindrance. Other-
wise the appliance has to work too
hard resulting in an increase in elec-
tricity consumption.
b
.
2
to ensure that air
The air inlet and outlet must not be
covered or blocked in any way.
They should be dusted on a regular
basis.
When built into a kitchen run (max.
depth 580 mm) the appliance can be
installed directly next to a kitchen furni-
ture housing unit. The appliance door
c
will protrude in front of furniture
fronts at the sides by 34 mm and by
51 mm in the middle of the door.
When
tance of approx. 36 mm is needed on
the hinge side between the wall and
the appliance, so that the door and the
handle have sufficient space for open-
ing.
When
e
appliance and the wall, please note the
following:
Ensure that the door has sufficient
space for opening fully after the ap-
pliance has been secured.
To secure the appliance to adjoining
kitchen furniture use self tapping
screws. The
not exceed
d
a dis-
is fitted between the
of the screw must
.
25
Advertisement
