Changing the door hinging
The appliance is supplied right hand
hinged. If you want it left hand hinged
follow the instructions below.
Open the appliance door.
Use a screwdriver to lever the plinth
b
facia
out, then pull it forwards and
off.
Use a screwdriver to remove cover
c
then close the door.
Remove screw
Pull door support
f
hinge pin
downwards, then tilt it
forwards and take it off.
Open the appliance door, move it
downwards and take it off.
d
completely.
e
together with
Unscrew the upper hinge pin
using the spanner supplied and refit
on the opposite side.
c
Remove spacer
and refit it on the opposite site.
d
Remove plugs
bushes in the door and refit on the
opposite side.
Hang the door in hinge pin
member to use the washers
close the door.
b
with a screwdriver
from door bearing
b
(re-
e
), then
23