Advertisement
Problem solving guide
Repairs to electrical appliances
should only be carried out by a suit-
ably qualified and competent per-
son in accordance with local and
national safety regulations. Unauth-
orised repairs could be dangerous.
The following can be corrected without
contacting the Miele Service Depart-
ment:
Check to see whether any pieces of
furniture next to the appliance are vi-
brating whilst the appliance is in
operation.
Switch the appliance off then:
Check whether the appliance is
aligned correctly.
Check whether all parts at the rear of
the appliance are free from hind-
rance. Remove any hindrance.
Check whether the cable clips were
unclipped from the back of the ap-
pliance before installation. They
could vibrate when the appliance is
operating.
Are all removable parts securely lo-
cated in the appliance?
Are bottles or containers touching
each other?
Remember that the noise of the com-
pressor and the coolant circulating in
the system is unavoidable.
Make sure the temperature selector
is not set at "0".
Check that the plug is correctly in-
serted in the socket.
Check that the fuse is not defective
and that the mains fuse has not
blown. If it has contact the Miele Ser-
vice Department.
Turn the temperature dial to a setting
closer to "0".
Check whether ventilation gaps have
been covered over or become too
dusty.
Check whether the metal grille (heat
exchanger) at the rear of the ap-
pliance has become too dusty.
Has the door been opened too fre-
quently.
Check that the door has been
properly closed.
17
Advertisement
