Catalyser; Controls - Miele H 370-2 Operating Instructions Manual

^ Push the glass cover back into the
metal brackets with the cut out edge
towards the rear.
^ Push the glass cover into its frame at
the front.
^ Replace the runners (and side liners
if fitted).
Reassemble in the reverse order, care-
fully ensuring all parts are correctly in
place.
Make sure the catalyser is switched on.
See "Altering oven settings, setting 02".
This is not a fault.
If the door is opened during operation,
the door contact switch causes the
oven heating, and the fan if on "Fan"
setting, to be switched off.
This is not a fault.
The cooling fan continues to run for a
while after the oven has been switched
off to prevent any humidity building up
in the oven, on the control panel or in
the oven housing unit. When the tem-
perature has fallen sufficiently the fan
switches off automatically.
The temperature will fall faster when the
oven door is opened partially or fully.
71