Miele H 370-2 Operating Instructions Manual page 57

^ All external surfaces and controls can
be cleaned using warm water with a
little washing up liquid applied with a
soft sponge or cloth.
^ Wipe the surfaces dry using a soft
cloth.
A microfibre "E-Cloth" is available from
the Miele UK Spare Parts Department,
Part number 98013530, which is suit-
able for cleaning surfaces such as
stainless steel, glass, plastic and
chrome without the use of chemicals. It
can be washed 300 times.
To prevent the risk of scratches and
damage to the surface structure of
glass, stainless steel and aluminium
fronted appliances pay particular atten-
tion to the following cleaning instruc-
tions.
The appliance front and controls are
susceptible to scratches and abrasion.
Avoid:
– abrasive cleaning agents, e.g. pow-
der cleaners and cream cleaners,
– abrasive sponges, e.g. pot scourers
or sponges which have been previ-
ously used with abrasive cleaning
agents,
– oven sprays.
Clean the door handle and the control
elements regularly, preferably after
each use.
This will help prevent grease or other
deposits adhering to surfaces and be-
coming difficult to remove.
Aluminium is affected by the way that
light falls on it, by the surrounding envi-
ronment and by the angle you observe
it from.
Aluminium surfaces and controls
may suffer discolouration or damage
if acids, alkalis or soiling are left on
them for too long. Remove these
straight away.
The appliance front and controls are
susceptible to scratches and abrasion.
Avoid:
– cleaning agents containing soda, ac-
ids or chlorides,
– abrasive cleaning agents, e.g. pow-
der cleaners and cream cleaners,
– abrasive sponges, e.g. pot scourers
or sponges which have been previ-
ously used with abrasive cleaning
agents,
– stainless steel cleaners,
– cleaning agents containing
descaling agents,
– diswasher detergent,
– oven sprays.
57