Table of Contents
Advertisement
Appliances without side wall heating
must not be installed "side-by-side"
next to another refrigerator or
freezer. This could cause
condensation between the two
appliances.
The appliance should be installed in a
dry well-ventilated room.
It should not be installed where it is
exposed to direct sunlight or directly
adjacent to a heat-producing appliance
such as an oven or a radiator.
Do not place any appliance which
gives off heat, such as a toaster or
microwave oven, on top of this
appliance, as this would increase
the appliance's energy
consumption.
The appliance is designed for a use
within certain climate ranges (ambient
temperatures) and should not be used
outside this range. The higher the
ambient temperature of the room the
more energy the appliance requires to
operate.
The climate range of this appliance is
stated on the data plate inside the
appliance.
SN
N
ST
T
+10 °C to +32 °C
+16 °C to +32 °C
+18 °C to +38 °C
+18 °C to +43 °C
Operating in a room which is too cold
(e.g. a garage in winter) will cause the
cooling system to switch off for too long
causing the internal temperature in the
appliance to rise with the risk of frozen
food defrosting.
Air at the back of the appliance gets
warm. To ensure sufficient ventilation,
the ventilation grilles must not be
covered over. The air inlet and outlet
must not be covered or blocked in any
way. They should be dusted on a
regular basis.
If the door hinging does not require
changing, the handles should now be
fitted to the doors.
^ Secure handle a to the holes in the
door using screws b.
37
Advertisement
Table of Contents
