Side-By-Side; Climate Range - Miele KWT 6312 UGS Operating And Installation Instructions

Side-by-side

This wine conditioning unit can be in-
stalled side-by-side with another refri-
geration appliance.
A side-by-side installation kit is re-
quired for this. This is available from
Miele or your Miele dealer.
Your dealer will be able to advise you
which combination of models is pos-
sible.
Instructions for fitting appliances side-
by-side are given in the side-by-side
fitting kit instruction manual.

Climate range

The wine conditioning unit is designed
for use within a certain climate range
(ambient temperatures) and should not
be used outside this range. The climate
range of the wine conditioning unit is
stated on the data plate inside it.
Climate range
SN
N
ST
T
Operating in a room which is too cold
will cause the compressor to switch off
for too long, causing the internal tem-
perature in the wine conditioning unit to
rise which could lead to damage.

Risk of damage due to high hu-
midity.
In environments with high humidity,
condensation can build up on the ex-
ternal wine conditioning unit panels,
which can cause corrosion.
Install the wine conditioning unit with
sufficient ventilation in a dry and/or
air-conditioned room.
After installation, make sure that the
appliance door closes properly, the
ventilation gaps are not covered and
that the wine conditioning unit has
been installed in accordance with
these operating and installation in-
structions.
Installation
Ambient room
temperature
+10 °C to +32 °C
+16 °C to +32 °C
+16 °C to +38 °C
+16 °C to +43 °C
59