Configuring Settings - Meridian G91 Installation Manual

Configuring settings

The Meridian setup menu allows you to configure settings that
affect the operation of the DVD player.
To configure settings
• Highlight Meridian setup... in the Setup menu, and press
Enter.
The Meridian setup menu will be displayed:
Option Values
Diagnostics Yes, No
System address 1-8
Product address 1-8
Controller Yes, No, Auto
Start source Source
Vol display No, Yes
Advanced OSD Off, On
Tuner Region (G91 only) Europe, America
Timeout To Home Off, On
The product settings are generally set to an appropriate value when
you reset the DVD player to the standard settings, and you should
not normally need to alter them.
The options are summarised in the following table for advanced
use:
Description
Whether diagnostic displays are shown on the front-panel display.
Advanced setting.
Advanced setting.
Whether the product is the infra-red controller for the system.
Specifies which source is selected when switching on from standby.
Specifies whether the DVD player displays the volume for the system.
Shows playback statistics in the OSD bar.
Band selection (MW/LW or AM) and the tuner deemphasis standard. Set to Europe for
other countries.
Sets a 30s timeout for the front-panel display to return to Home.
4 3
C o n f i g u r i n g
t h e D V D p l a y e r