Table of Contents
Advertisement
3 4
C o n f i g u r i n g
Configuring the audio
t h e D V D p l a y e r
The Audio setup menu lets you select the audio settings of the
DVD player.
• Highlight Audio setup... in the Setup menu, and press Enter.
The Audio setup menu will be displayed:
The Speakers... option only appears on the G91.
DVD player application
The options on the Application menu allow you to configure
the audio outputs for optimum performance, depending on the
capabilities of the equipment you are connecting to. For more
information about the applications see Applications , page 11.
Select this option
Preamp – An Out (Type 0)
Preamp – Aux Out
Preamp – Dig Out (Type 1)
Transport (Type 3/4/5)
Surround (Type 6)
For this application
To use the DVD player as a preamplifier, connected via the analogue outputs to a power amplifier or
analogue active speakers. All the other Application options provide fixed analogue outputs.
To use the DVD player as a preamplifier, connected via the AUX DIGITAL output to a pair of DSP
loudspeakers or a digital surround controller.
To use the DVD player as a preamplifier, connected via the L/R MAIN DIGITAL output to a pair of DSP
loudspeakers or a digital surround controller.
To connect the DVD player to the multichannel inputs of a Meridian digital surround controller via the L/R,
C/LFE, and SURR MAIN DIGITAL outputs.
To connect the DVD player LR, C/LFE, and SURR MAIN DIGITAL outputs directly to DSP loudspeakers.
• Highlight Application in the Audio setup menu, and press
Enter.
The Application menu is displayed. The options are different for
the G91 and G98.
To specify the application for the G91
On the G91 the Application menu provides five options:
These are explained in the following table:
Hide quick links:
Advertisement
Table of Contents
