Meridian G91 Installation Manual page 19

To create a surround system with a G91 ( Type 6)
DSP5000C
(master)
INPUT
COMMS
OUTPUT
DIGITAL
OUTPUT
1
DIGITAL
INPUTS
2
DSP loudspeaker (slave)
DIGITAL INPUTS
2 1
The G91 includes all the digital signal processing needed to create
a 5.1 surround system.
• Use the Comms part of an M5 lead to connect one of the
COMMS sockets on the G91 to the digital speaker you have
chosen as the master (typically the centre speaker).
• Use the audio part of the M5 lead to connect the digital speaker
to the appropriate digital output socket.
Analogue subwoofer
G91 DVD Audio Player Controller Tuner
INPUT
M5 LEAD
S5 LEAD (digital unused)
DIGITAL DIGITAL INPUTS
COMMS
OUTPUT
OUTPUT INPUT 2
S5 LEAD
If the system includes more than two Meridian DSP loudspeakers
you will need a 511 S-patch box (available separately) to link
together the S5 leads from each speaker.
• Connect the COMMS output from the master digital speaker to
one socket on the 511 using an S5 lead.
• Link each pair of speakers together with an S5 lead, out of
the first speaker and into the second speaker, as shown in the
diagram for the main left and right speakers
COMMS
PRE OUT MAIN
AN DIGITAL OUT
511 S-patch box
S5 LEAD
DSP loudspeaker (slave)
DIGITAL
COMMS
OUTPUT
1 OUTPUT INPUT
1 5
I n s t a l l i n g t h e
D V D p l a y e r