Table of Contents
Advertisement
Configuring settings
The Meridian setup menu allows you to configure settings that
affect the operation of the DVD player.
To configure settings
• Highlight Meridian setup... in the Setup menu, and press
Enter.
The Meridian setup menu will be displayed:
Option
Values
System address
1-8
Product address
1-8
Controller
Yes, No, Auto
Start source
Source
Volume
Main, Secondary, None
Vol display
No, Yes
Advanced OSD
Off, On
Tuner Region (AM/FM only)
Europe, America, Japan
Timeout To Home
Off, On
The product settings are generally set to an appropriate value when
you reset the DVD player to the standard settings, and you should
not normally need to alter them.
The options are summarised in the following table for advanced
use:
Description
Advanced setting.
Advanced setting.
Whether the product is the infra-red controller for the system.
Specifies which source is selected when switching on from standby.
Specifies whether the DVD player controls the main volume, volume in a two-
room system, or has independent volume control.
Specifies whether the DVD player displays the volume for the system.
Shows playback statistics in the OSD bar.
Band selection (MW/LW or AM) and the tuner deemphasis standard. Set to
Europe for other countries.
Sets a 30s timeout for the front-panel display to return to Home.
C o n f i g u r i n g
t h e D V D p l a y e r
Advertisement
Table of Contents
