Meridian G91 Installation Manual page 23

To connect using composite video
G Series DVD player
COMPOSITE S-VIDEO
• Connect the composite video output to a corresponding input on
a television, monitor, or video control unit using a screened 75
video cable.
To connect using HDMI
G Series DVD player
S-VIDEO COMP
• Connect the HDMI output to the HDMI input on the monitor
using an HDMI cable.
HDMI carries the AUX audio output stream, providing either
bitstream DD/DTS or two-channel PCM. To do this set the
Application to Aux Out; see DVD player application , page 34.
Also, set the Aux out Max rate to 48kHz; see To specify the
auxiliary output settings , page 36.
COMPONENT
COMPOSITE
IN
COMPOSITE LEAD
The composite video output is always active, irrespective of the
Video output setting.
HDMI
HDMI
HDMI LEAD
HDMI can be connected to a DVI input if the monitor supports
HDCP copy protection, using a suitable adaptor cable. In this case
DVI mode should be set to DVI in the HDMI setup menu; see To
set the HDMI options , page 33.
Television/monitor
Monitor
1 9
I n s t a l l i n g t h e
D V D p l a y e r