Meridian G91 Installation Manual page 36

3 2
C o n f i g u r i n g
t h e D V D p l a y e r
The appropriate menu is displayed:
• Press
You can also adjust the intensity of the logo screen, which is
displayed as a background image when no video disc is playing
and the DVD player is not in screensaver mode.
• Highlight Logo screen in the Screensaver options menu, and
press Enter.
The Logo screen intensity menu allows you to select between
High, Low or Off:
or to select the timeout delay, and press Enter.
To set the scaler options
These specify how the interlaced video signal from the DVD should
be upconverted to the HDMI and component outputs.
• Highlight Scaler setup... in the Video setup menu, and press
Enter.
The Scaler setup menu is displayed:
• Press or to highlight the setting you want to change, and
press Enter.
The Scaler mode options are explained in the following table:
Scaler Mode Description
Deinterlace Converts 480i (NTSC) to 480p and 576i (PAL)
to 576p.
720p Upconverts to High Definition standard 720p
progressive video.
1080i Upconverts to High Definition standard 1080i
interlaced video.
Auto Automatically selects the best resolution for the
display device connected to the HDMI connector.