Meridian G91 Installation Manual page 37

The Gamma correction affects the grey scale, and can be set
to 1.0, 0.8, 0.9, or 1.1. If the picture has poor detail in the dark
areas choose a Gamma correction below 1.0. If the picture
has poor detail in the light areas choose a Gamma correction
greater than 1.0.
The Sharpness can be set to Off, Low, Medium, or High. It
adds edge detail, but can cause picture artefacts.
Gamma correction and Sharpness only affect the analogue
outputs.
Component output allows you to choose what is available on
the component output socket. Standard Definition gives an SD
interlaced component signal. Scaled gives a deinterlaced signal;
for this option the Scaler mode should be set to Deinterlace.
To set the HDMI options
• Highlight HDMI options... in the Video setup menu, and
press Enter.
The HDMI setup menu is displayed:
• Press or to highlight the setting you want to change, and
press Enter.
The DVI mode can be set DVI or HDMI. Only choose DVI if you
are connecting to a DVI input using a suitable adaptor cable.
The Colour space can be set to RGB or YCrCb.
Meridian Comms determines whether Meridian Comms is
supplied on the HDMI cable, and can be set to No or Yes.
The Audio source option only appears on the G91 and allows you
to specify the source of the audio on the HDMI connector. Preamp
takes it from the DVD player preamplifier output, and Transport
takes it direct from the DVD audio.
3 3
C o n f i g u r i n g
t h e D V D p l a y e r