Meridian G91 Installation Manual page 43

The following menu is displayed:
• Press or to select No or Yes, and press Enter.
If you are connecting the multichannel output to a Meridian
product that is MHR compliant, such as the G68, select Yes to take
advantage of MHR; otherwise select No.
To select internal decoding for the multichannel output
• Highlight Internal decode in the Multichannel out menu,
and press Enter.
The following menu is displayed:
• Choose Yes if you are connecting the multichannel outputs to a
Meridian digital surround controller.
To configure speakers ( G91 only)
If you are using the G91 in a surround application, directly
connected to DSP loudspeakers and up to two analogue speakers,
the Speakers menu allows you to configure the speaker layout
and enter calibration settings.
• Highlight Speakers... in the Audio setup menu, and press
Enter.
The Speakers menu will be displayed:
3 9
C o n f i g u r i n g
t h e D V D p l a y e r