Table of Contents
Advertisement
Configuring the 598 DVD Audio Player
To configure specific options
Highlight Meridian setup in the Setup menu, and press
Enter.
The Meridian setup menu will be displayed:
To set configuration options
The configuration options are generally set to an appropriate
value when you reset the 598 to the standard settings, and you
should not normally need to alter them; see Choosing standard
settings, page 62.
The options are summarised in the following table for advanced
use:
Option
Default
Diagnostics
No
System address
1
Product address
1
Controller
Auto
Start source
DVD
Vol display
No
Fan
As
required
Source config
Description
Set to Yes for a diagnostic
display on the front panel
display.
Set to a value from 1 to 8.
Set to a value from 1 to 8.
Specifies whether the DVD
player is controller, not
controller, or set automatically.
Specifies which source is
selected when switching on from
standby.
Specifies whether the DVD
player displays the volume for
the system.
Set to Always to keep the fan
permanently on, or As required
to use it when necessary.
Allows you to configure the
sources; see below.
63
Advertisement
Table of Contents
