Table of Contents
Advertisement
The following table describes the fields present in Menu 24.1 – System Maintenance – Status. It should
be noted that these fields are READ-ONLY and are meant to be used for diagnostic purposes.
Table 10-1
FIELD
Chan
Link
Type
TXPkts
RXPkts
Errors
CLU (Current Line Utilization)
ALU (Average Line
Utilization)
Up Time
Total Up Time
CPU Load
Ethernet
Status
TX Pkts
RX Pkts
Collisions
WAN
IP Address
System Information
System Maintenance – Status Menu Fields
Shows the statistics for logical channels.
Shows the Remote Node the channel is currently connected to or the
status of the channel (Idle, Calling, or Answering).
Shows the current connecting speed (64K or 128K).
Shows the number of transmitted packets on this channel.
Shows the number of received packets on this channel.
Shows the number of error packets on this channel.
Shows the percentage of current bandwidth used on this channel.
Shows the average CLU for this channel.
Shows the time this channel has been connected to the current Remote
Node.
Shows the total time this channel has been connected to the current
Remote Node.
Specifies the percentage of CPU utilization.
Shows the current status of the LAN connection on your Prestige.
Shows the current status of the LAN that is 10M/Half Duplex. Left hand
side of the "/" is the speed of the Ethernet and the right hand side is the
mode of the Ethernet.
Shows the number of transmitted packets to LAN.
Shows the number of received packets from LAN.
Shows the number of collisions.
Shows the IP address of the current channel.
Prestige 100L IDSL Router
DESCRIPTION
10-3
Advertisement
Table of Contents
Troubleshooting
