Syslog Server; System Maintenance Menu Syslog Parameters; Table - ZyXEL Communications Prestige 100L User Manual

10.3.2 Syslog Server

The Prestige uses the UNIX syslog facility to log the CDR (Call Detail Record) and system messages to a
syslog server. Syslog and accounting can be configured in Menu 24.3.2 – System Maintenance – Syslog
and Accounting, as shown next.
Press Space Bar to Toggle.
Figure 10-8
You need to configure the UNIX syslog parameters described in the following table to activate syslog then
choose what you want to log.

Table 10-3

PARAMETER
Syslog:
Active
Syslog IP Address
Log Facility
NOTE: Your Prestige sends two different types of syslog messages:
Error Information Messages and Session Information Messages.
System Information
Menu 24.3.2 - System Maintenance - Syslog and Accounting
Syslog:
Active= No
Syslog IP Address= ?
Log Facility= Local 1
Press ENTER to Confirm or ESC to Cancel:
Menu 24.3.2 – System Maintenance – Syslog and Accounting

System Maintenance Menu Syslog Parameters

Press [space bar] to turn on (Yes) or off (No) syslog.
Enter the IP address that you wish to send your syslog to. The address is usually
written in dotted decimal notation such as a.b.c.d where a, b, c, and d are numbers
between 0 and 255.
Press [space bar] to toggle between the 7 different Local options. The log facility
allows you to log the message to different files in the server. Please refer to your
UNIX manual for more details.
DESCRIPTION
Prestige 100L IDSL Router
10-7