Example Of Ftp Commands From The Dos Prompt; Third Party Ftp Clients; Tftp And Ftp Over Wan Will Not Work When; Figure 5-2 Ftp Session Example - ZyXEL Communications Prestige 724 User Manual

Prestige 724 G.SHDSL CSU/DSU

5.2.3 Example of FTP Commands from the DOS Prompt

331 Enter PASS command
Password:
230 Logged in
ftp> bin
200 Type I OK
ftp> get rom-0 zyxel.rom
200 Port command okay
150 Opening data connection for STOR ras
226 File received OK
ftp: 16384 bytes sent in 1.10Seconds 297.89Kbytes/sec.
ftp> quit

5.2.4 Third Party FTP Clients

The following table describes some of the commands that you may see in third party FTP clients.

Table 5-2 General Commands for Third Party FTP Clients

COMMAND
Host Address
Login Type
Transfer Type
Initial Remote Directory
Initial Local Directory

5.2.5 TFTP and FTP over WAN Will Not Work When

•
Telnet service is disabled.
•
A filter is applied to block Telnet service.
•
There is a SMT console session running.
5-4

Figure 5-2 FTP Session Example

Enter the address of the host server.
Anonymous.
This is when a user I.D. and password is automatically supplied to the
server for anonymous access. Anonymous logins will work only if your
NSP or service administrator has enabled this option.
Normal.
The server requires a unique User ID and Password to login.
Transfer files in either ASCII (plain text format) or in binary mode.
Specify the default remote directory (path).
Specify the default local directory (path).
DESCRIPTION
Firmware and Configuration File Maintenance