ZyXEL Communications Prestige 650H-17 User Manual page 70

Prestige 650H-17 ADSL Router
FIELD
Encapsulation
Multiplexing
Service Name
Incoming:
Rem Login
Rem Password
Outgoing:
My Login
My Password
Route
4-4
Table 4-1 Remote Node Profile Menu Fields
PPPoA refers to RFC-2364 (PPP Encapsulation over
ATM Adaptation Layer 5).
If RFC-1483 (Multiprotocol Encapsulation over ATM
Adaptation Layer 5) of ENET ENCAP are selected,
then the Rem Login, Rem Password, My Login, My
Password, Edit PPP Options and Authen fields are not
applicable (N/A).
Press [SPACE BAR] and then [ENTER] to select the
method of multiplexing that your ISP uses, either VC-
based or LLC-based.
When using PPPoE encapsulation, type the name of
your PPPoE service here.
Type the login name that this remote node will use to
call your Prestige. The login name and the Rem
Password will be used to authenticate this node.
Type the password used when this remote node calls
your Prestige.
Type the login name assigned by your ISP when the
Prestige calls this remote node.
Type the password assigned by your ISP when the
Prestige calls this remote node.
Authen This field sets the authentication protocol used for
outgoing calls. Options for this field are:
CHAP/PAP – Your Prestige will accept either CHAP or
PAP when requested by this remote node.
CHAP – accept CHAP (Challenge Handshake
Authentication Protocol) only.
PAP – accept PAP (Password Authentication Protocol)
only.
This field determines the protocol used in routing.
Options are IP and None.
DESCRIPTION EXAMPLE
PPPoA
LLC-based
N/A
PAP
IP
Remote Node Configuration