Figure 3-1 Wizard Screen 1; Table 3-1 Wizard Screen 1 - ZyXEL Communications Prestige 623R-T User Manual

The following table describes the labels in this screen.
LABEL
Mode From the Mode drop-down list box, select Routing (default) if your ISP allows multiple
computers to share an Internet account. Otherwise select Bridge.
Encapsulation Select the encapsulation type your ISP uses from the Encapsulation drop-down list box.
Choices vary depending on what you select in the Mode field.
If you select Bridge in the Mode field, select either PPPoA or RFC 1483.
If you select Routing in the Mode field, select PPPoA, RFC 1483, ENET ENCAP or PPPoE.
Multiplex Select the multiplexing method used by your ISP from the Multiplex drop-down list box either
VC-based or LLC-based.
Virtual Circuit VPI (Virtual Path Identifier) and VCI (Virtual Channel Identifier) define a virtual circuit. Refer to
ID the appendix for more information.
VPI Enter the VPI assigned to you. This field may already be configured.
VCI Enter the VCI assigned to you. This field may already be configured.
Wizard Setup

Figure 3-1 Wizard Screen 1

Table 3-1 Wizard Screen 1

DESCRIPTION
Prestige 623R-T ADSL Dual-link Router
3-3