Prestige 623R-T ADSL Dual-link Router
23.3.2 Restore Using FTP Session Example
ftp> put config.rom rom-0
200 Port command okay
150 Opening data connection for STOR rom-0
226 File received OK
221 Goodbye for writing flash
ftp: 16384 bytes sent in 0.06Seconds 273.07Kbytes/sec.
ftp>quit
Refer to section 23.2.5 to read about configurations that disallow TFTP and FTP over WAN.
23.4 Uploading Firmware and Configuration Files
This section shows you how to upload firmware and configuration files. You can upload configuration files
by following the procedure in the previous Restore Configuration section or by following the instructions in
Menu 24.7.2 – System Maintenance – Upload System Configuration File (for console port).
DO NOT INTERRUPT THE FILE TRANSFER PROCESS AS THIS MAY
23.4.1 Firmware File Upload
FTP is the preferred method for uploading the firmware and configuration. To use this feature, your
computer must have an FTP client.
When you telnet into the Prestige, you will see the following screens for uploading firmware and the
configuration file using FTP.
23-8
Figure 23-4 Restore Using FTP Session Example
PERMANENTLY DAMAGE YOUR PRESTIGE.
WARNING!
Firmware and Configuration File Maintenance