ZyXEL Communications Prestige 623R-T User Manual page 156

Prestige 623R-T ADSL Dual-link Router
FIELD
Active Indicates whether the static route is active (Yes) or not (No).
Ether Address Type the MAC address of the destination computer that you want to bridge the
packets to.
IP Address If available, type the IP address of the destination computer that you want to bridge
the packets to.
Gateway Node Press [SPACE BAR] and then [ENTER] to select the number of the remote node (one
to eight) that is the gateway of this static route.
When you have completed this menu, press [ENTER] at the prompt "Press ENTER to confirm or ESC to
cancel" to save your configuration or press [ESC] to cancel and go back to the previous screen.
18-4
Table 18-2 Menu 12.3.1 Edit Bridge Static Route
DESCRIPTION
Bridging Setup