Quick Start Mode - Teledyne 3060E Instruction Manual

Model 3060E Model 3060E Model 3060E
Model 3060E Model 3060E
VALVES: ANALYZE
CONNECTING SENSOR
PLEASE WAIT . . .
1 2 3
VALVES: ANALYZE
FLOW = 150.0 CC/M IN
5.00
PPM 02
AUTORANGE: 10 PPM
CAL STDBY SETUP
1 2 3

Quick Start Mode

VALVES: OFF
WARNING: IF THIS IS THE FIRST
SETUP THE FULL STARTUP
IS REQUIRED
FULL QUICK
1 2 3
VALVES: OFF
CONNECT A SAMPLE GAS
TO THE SAMPLE PORT
. . . PRESS ACK WHEN READY . . .
1 2 3
4-20
31. The Ultra Trace sensor is reconnected.
After the sensor connects, the system
automatically returns you to the Ana-
lyze mode main menu.
4 5
• From the Analyze mode you can
T=25C
calibrate, set up the alarms, modem,
etc., set the range, or go to stand-by.
RANGE ALRM R
4 5
1. Turn the power switch
screen displays the name of the com-
pany, instrument model numbers and
software version. You are asked to wait
for start-up initialization.
2. After a few minutes, the screen displays
the options
mode. Press
4 5
3. After pressing
you to select the background gas using
the knob on the front panel. Press
ACCPT
return to the previous screen.
4. After you press
background gas, the screen directs you
to connect the sample gas to the sample
port. Press
ACK ESC
4 5
Teledyne Electronic Technologies
Analytical Instruments
. The first
ON
or
FULL QUICK START
for
QUICK QUICK START
the screen directs
QUICK
after selection. Press
ESC
to select a
ACCPT
or to continue.
ACK ESC
Chapter 4 Chapter 4 Chapter 4
Chapter 4 Chapter 4
.
to