Cautions And Warnings - Teledyne 3060E Instruction Manual

Model 3060E Model 3060E Model 3060E
Model 3060E Model 3060E
2. Standard accessory kit for the 3060E (P/N A59582):
Qty
12
6
6
1
1
1
1
1
1
1
1
1
1
1
1
1
1 pr.
1
3. Instruction Manual
4. Quick Reference: Start Up

Cautions and Warnings

1. Always use extreme care when handling the electrolyte bottles.
Electrolyte can cause skin irritation. If the electrolyte comes into
contact with skin, immediately wash the affected area with cold
water.
CAUTION: The sensor electrolyte is caustic. Protective equipment
including, but not limited to, gloves and safety glasses should
be worn while handling electrolyte. See the Material Safety
Data Sheets for potential hazards and corrective action in
case of accident.
2. Use the correct syringe for each type of electrolyte. The 50 cc
syringe is used with the sensor electrolyte. The 2 cc syringe is used
with the calibrator electrolyte.
3. Before adding electrolyte to the sensor, examine the electrical
connections on the sensor body to make sure that they are firmly
secured to the proper terminals.
3-2
P/N Description
G284 Gaskets, VCR-type
G352 Weld glands, male, VCR-type
N284 Nuts, female
W66 Wrench, open end, ¼ " -
S915 Screwdriver, #0 Phillips drive
S916 Screwdriver, slotted drive
S914 Socket,
R1549 Rachet, quick release, ¼ " drive
W68 Allen wrench, with handle,
W69 Allen wrench, long arm,
A51934 KOH electrolyte
A64239 Calibration electrolyte
B51752 Syringe 50 cc (Assembled)
A51886 Syringe 2 cc (Assembled)
T1052 Fritted glass tube
Safety glasses
Gloves, rubber
MP-A56133 Procedure for Preparation of Electrolyte
Teledyne Electronic Technologies
Analytical Instruments
5
/ "
16
7
/ " for ¼ " drive
16
7
/ "
64
7
/ "
64
Chapter 3 Chapter 3 Chapter 3
Chapter 3 Chapter 3