Setup: Alarms - Teledyne 3060E Instruction Manual

Model 3060E Model 3060E Model 3060E
Model 3060E Model 3060E

Setup: Alarms

VALVES: ANALYZE C=9:59
FLOW = 150.0 CC/M IN
5.00
PPM 02
AUTORANGE: 10 PPM
CAL STDBY SETUP
1 2 3
NOTE: The ALRMR key in the Analyze mode menu is used to defeat the
audible alarm in increments of 15 seconds, after which the alarm
will continue if the condition that triggered the alarm is still
present.
VALVES: ANALYZE C=9:59
SELECT SYSTEM PASSW ORD SETUP
- - OR - -
SERIAL M ODEM , ZERO GAS SCRUB
OR NEGATIVE O2 READINGS
SYSTM M ODEM GAS
1 2 3
NOTE: If the authorization code is lost or needs to be changed, refer to the
Cold Start procedure at the beginning of this chapter.
VALVES: ANALYZE C=9:59
- - - - SYSTEM SETUP - - - -
CLOCK: SET TIM E AND DATE
ALRM S: SET LIM ITS, TYPES
SETTL: SETUP AUTO SETTLING
CLOCK ALRM S SETTL
1 2 3
VALVES: ANALYZE C=9:59
ALARM S SETUP
SELECT ALARM TO SETUP
AL 2
AL 1 M ORE
1 2 3
4-40
1. After completing initial start-up, select
T=25C
SETUP
select the alarm setup function.
RANGE ALRM R
4 5
T=25C
2. Press
NegO2 ESC
4 5
3. The next screen asks you to enter your
authorization code. Use the
DOWN
numbers. Press
desired value for each space in the code.
Press
T=25C
4. Press
or
ESC
M ORE
ESC
4 5
T=25C
5. The next screen directs you to select
which alarm to set up. You can set up
to five alarms. Press
ESC
4 5
2 for alarm 2, or
AL
4, and 5. Press
Teledyne Electronic Technologies
Analytical Instruments
from the Analyze mode menu to
to continue alarm setup.
SYSTM
keys to scroll through the letters/
to enter the
SELEC
when finished.
ACCPT
to continue alarm setup,
ALRMS
to return to the Analyze mode.
1 for alarm 1,
AL
for alarms 3,
MORE
to return to step 4.
ESC
Chapter 4 Chapter 4 Chapter 4
Chapter 4 Chapter 4
and
UP