Zero Calibration - Teledyne 3060E Instruction Manual

Quic Quic k Ref k Ref erence erence
Quick Ref Quic Quic k Ref k Reference erence erence

Zero Calibration

THE SCREEN DISPLAYS WHETHER
THE ANALYZER IS USING THE
INTERNAL SCRUBBER
OR AN EXTERNAL ZERO GAS
PRESS ACK WHEN THE BACKGROUND
SIGNAL STABILIZES AND IS WITHIN
THE APPLICABLE LIMIT
NOTE: If the background level does not
fall below the acceptable limit after
5-7 days, replace the electrolyte with
prepurged electrolyte. Refer to Sections
3.3.1 and 4.3.7.2 for more details
CALIBRATION PROCESS COMPLETED
PRESS ACK TO RETURN TO ANALYZE MODE
CAL STDBY SETUP
CAL
ZERO
MAN
Figure 6-6. Calibration/Zero Calibration
Teledyne Electronic Technologies
Analytical Instruments
Ultra T T T T T race Oxyg Ultra Ultra race Oxyg race Oxyg en Anal en Anal
Ultra Ultra race Oxygen Anal race Oxyg en Anal en Analyz
RANGE ALRMR
NOTE: Pressing ESC brings you
SCREEN WILL DISPLAY PRESENT
OXYGEN CONCENTRATION, FLOW RATE
AND TIME REMAINING
PRESSING ANY KEY WILL ABORT
AUTO SETTLING
PRESSING ACK AFTER
ABORTING AUTO SETTLING
RETURNS YOU TO ANALYZE MODE
AFTER AUTO SETTLING, THE SYSTEM
WILL AUTOMATICALLY RETURN
TO THE ANALYZE MODE
yz yz yz yzer er er er er
back to previous screen.
6-9