Yamaha PM1D Supplementary Manual page 4

PM1D Manager for Windows Operating manual
If a digital I/O card (MY card) is assigned
If 2TR IN is assigned
If the output of an effect return is assigned
4
Digital gain
Digital gain can be used to adjust the input sensitivity in
a range of +10 dB– –20 dB (the knob will not turn any
further to the right beyond –20 dB).
Digital gain
Only in the case of the digital gain for an input channel,
you can also use the [GAIN] encoder of the CS1D's
INPUT block to adjust the setting. In this case as well,
the adjustable range for the input is +10 dB– –20 dB (the
knob will not turn any further to the right beyond –20
dB). Internally, the input sensitivity is adjusted in a gain
range of –10 dB to +20 dB. If you want a digital source to
Digital gain
be input at nominal level, set the GAIN knob in the
screen to 0 dB.
If a GEQ output is assigned
GAIN
+10 -68
If a mic/line input card (LMY2-ML) is assigned to
an input channel/insert input, the screen will show
an analog gain knob (range: +10 dB– –68 dB), just
as in the previous software version.
If TB (talkback) is assigned to an input channel/
insert input, the input level will be adjusted by the
panel TALKBACK [LEVEL] volume, just as in the
previous software version.
Digital gain
GAIN
+10 -68