Yamaha PM1D Supplementary Manual page 14

PM1D Manager for Windows Operating manual
*1: PAN refers to any of the pan modes INDIVIDUAL PAN, GANG PAN, or INVERTED GANG PAN.
*2: This is the operation that will occur when pairing settings are changed in the screen or panel. If pairing settings were changed as a result of a scene recall, the stored
PAN/BALANCE status will be followed.
*3: "Parameters" refers to parameters that are linked when channels are paired.
*1: PAN refers to any of the pan modes INDIVIDUAL PAN, GANG PAN, or INVERTED GANG PAN.
*1: PAN refers to any of the pan modes INDIVIDUAL PAN, GANG PAN, or INVERTED GANG PAN.
*1: PAN refers to any of the pan modes INDIVIDUAL PAN, GANG PAN, or INVERTED GANG PAN.
14
Paired LR-MONO
• The PAN value of the L/R channels and the PAN
MODE setting will be temporarily preserved.
• The L/R channel PAN will be CENTER.*
• PAN to a paired VARI-type MIX bus will also be
set to CENTER.
• The BALANCE value of the L/R channels and
the PAN MODE setting will be temporarily pre-
served.
• The L/R channel PAN will be CENTER.*
• BALANCE to a paired VARI-type MIX bus will
change to PAN, and set to CENTER.
• PAN MODE will be set to INDIVIDUAL PAN.
L-MONO Pairing defeated
R-MONO Pairing defeated
LR-MONO Pairing defeated
• The L/R channel PAN setting and PAN MODE
will not change.
• PAN to a paired VARI-type MIX bus will not
change.
• The BALANCE setting of the L/R channels and
the PAN MODE setting will not change.
• The PAN setting to a paired VARI-type MIX bus
will not change.
L-MONO R-MONO
• The PAN value of the L/R channels and the PAN
MODE setting will not change.
• PAN to a paired VARI-type MIX bus will also
remain unchanged.
• The R channel ON/OFF will be set to the same
setting as the L channel, and the L channel ON/
OFF setting will be turned OFF.
• The BALANCE value of the L/R channels and
the PAN MODE setting will not change.
• BALANCE to a paired VARI-type MIX bus will
also remain unchanged.
• The R channel ON/OFF will be set to the same
setting as the L channel, and the L channel ON/
OFF setting will be turned OFF.
L-MONO LR-MONO
• The PAN value of the L/R channels and the PAN
MODE setting will not change.
• PAN to a paired VARI-type MIX bus will also
remain unchanged.
• The R channel ON/OFF will be set to the same
setting as the L channel, and the L channel ON/
OFF setting will not change.
• The PAN (BALANCE) value of the L/R channels
and the PAN MODE setting will not change.
• PAN to a paired VARI-type MIX bus will also
remain unchanged.
• The R channel ON/OFF will be set to the same
setting as the L channel, and the L channel ON/
OFF setting will not change.
LR-MONO
• The PAN/BALANCE value of the L/R channels
2
and the PAN MODE will return to the settings
that were in effect when the channels were
2
paired.*
• PAN to a paired VARI-type MIX bus will change
to PAN or BALANCE, and will be set to the same
value as the temporarily preserved PAN value
2 for TO ST.
• R-channel parameters other than PAN will be
set identically to the L channel.*
Pairing defeated
Pairing defeated
Pairing defeated
• These operations are invalid.
R-MONO
• The PAN value of the L/R channels and the PAN
MODE setting will not change.
• PAN to a paired VARI-type MIX bus will also
remain unchanged.
• The L channel ON/OFF will be set to the same
setting as the R channel, and the R channel ON/
OFF setting will be turned OFF.
• The BALANCE value of the L/R channels and
the PAN MODE setting will not change.
• BALANCE to a paired VARI-type MIX bus will
also remain unchanged.
• The L channel ON/OFF will be set to the same
setting as the R channel, and the R channel ON/
OFF setting will be turned OFF.
R-MONO
• The PAN value of the L/R channels and the PAN
MODE setting will not change.
• PAN to a paired VARI-type MIX bus will also
remain unchanged.
• The L channel ON/OFF will be set to the same
setting as the R channel, and the R channel ON/
OFF setting will not change.
• The PAN (BALANCE) value of the L/R channels
and the PAN MODE setting will not change.
• PAN to a paired VARI-type MIX bus will also
remain unchanged.
• The L channel ON/OFF will be set to the same
setting as the R channel, and the R channel ON/
OFF setting will not change.
Paired
3
L-MONO
R-MONO
LR-MONO
L-MONO
LR-MONO