Digital Gain; Gain Compensation Mode; All Gc On; All Gc Off - Yamaha CL3 User Manual

Yamaha Commercial Audio

4.8.1 Digital Gain

When Gain Mode is active, the user can also adjust the Digital Gain for
any channel. Press the [DIGITAL] button to assign all StageMix faders
to control the Digital Gain parameters. The background will change to
a blue shade to indicate that Digital Gain mode is active.

4.8.2 Gain Compensation Mode

Gain Compensation can be activated for each input channel
independently in CL series consoles. In Analog Gain mode, a [GC]
button in each channel strip allows Gain Compensation to be turned On
or Off from StageMix.
The [GC] button will only be available for channels that are patched to a
Rio I/O Rack that provides Gain Compensation capability. The [GC]
button will turn blue when Gain Compensation is active for that channel.
In Analog Gain mode, a blue dot will appear next to the fader to indicate
the original Analog gain position. If Gain Compensation is turned off for
a channel, the gain control fader will return to this position. (Refer to
the CL series console's Owner's Manual for more detailed information
about Gain Compensation mode and functions.)

4.8.3 ALL GC ON

Press the [ALL GC ON] button to activate Gain Compensation for every
channel in the console that is patched to a Rio I/O Rack input which
provides the Gain Compensation capability. A confirmation dialog will
appear before this function is executed.

4.8.4 ALL GC OFF

Press [ALL GC OFF] to turn off Gain Compensation for all channels. A
confirmation dialog will appear before this function is executed.

4.8.5 Input Port

When GAIN mode is active, the input port assigned to each channel will
be displayed at the top of each channel strip (EQ and Pan are not
displayed when GAIN mode is active). Input Port is a display-only
parameter and cannot be edited from StageMix.

4.8.6 Phantom Power

The 48V phantom power status for each input channel is also displayed
at the top of each channel strip when GAIN mode is active. The 48V
indicator will appear in red when phantom power is active. Phantom
Power status is display-only and cannot be edited from StageMix.

4.8.7 Phase

The Phase setting for each input channel appears near the top of the
channel strips when GAIN mode is active. The Phase setting can be
edited from StageMix by pressing this button. The button will have a
CL StageMix V3.0 User Guide
Page 14