Deleting Or Overwriting A Report - Fluke Network Tester User Manual

c. Move the cursor to Save Report. Then,
press SELECT to save.
If you inadvertently give two reports the same name
on NetTool, check the date/time stamp when you
view the reports to differentiate between them.
After you save a report, you can use NetTool Toolkit
to upload, view, and print it. See the online Help for
instructions.

Deleting or Overwriting a Report

To delete or overwrite a report:
1. From the Main menu, select ToolKit.
2. Move the cursor to Reporter, then press SELECT to
display the Reporter Menu.
Creating and Managing Reports
Deleting or Overwriting a Report
3. Do one of the following;
•
To delete all reports in the list, select Delete All
Reports.
•
To delete a single report, select the desired
report from the list. Then, select Delete Report.
•
To overwrite a report, select the desired report.
Then, select Overwrite Report.
8
8-3