Creating A List Of Ip Addresses To Ping; Selecting A Language For The Display Screens; Obtaining Information About Your Nettool - Fluke Network Tester User Manual

NetTool
Users Manual
5. Press SELECT to save the IP address for NetTool.
NetTool lists the updated address with the subnet and
router IP addresses.
6. In like manner, configure the subnet mask and router
addresses.
NetTool assists you by entering the first parts of those
addresses based on common addressing rules.

Creating a List of IP Addresses to Ping

Select Ping List Editor to display a screen that lets you
view, edit, or add to the lists of preset IP addresses that
you previously downloaded using NetTool Toolkit.
You can add IP addresses to an existing list or edit an
existing IP address within a list.
To add or edit an IP address:
1. Press an arrow key to move the cursor to the desired
IP address.
2. Press SELECT.
2-4
3. Do one of the following:
•
To add an IP address to the list, select Add New
Device then add it to the list.
•
To edit an existing address, select it then change
any of the octets within the address.

Selecting a Language for the Display Screens

To select a language for your display screens:
1. Select Language.
2. Choose the desired language.

Obtaining Information about Your NetTool

To view information about your tester, such as the
software version, serial number, and MAC address, select
About NetTool.
Be sure to record the serial number and MAC address of
your tester for future reference.