Changing The System Settings - Fluke Network Tester User Manual

NetTool
Users Manual

Changing the System Settings

Select Settings to display the Settings menu:
Figure 2-2. Settings Menu
On this menu, you can do the following:
•
Check the battery level.
If NetTool is running on battery power, the battery
level indicator is displayed at the top of every
Setup screen.
•
Select a unit of measurement (Feet or Meters).
•
Enable/disable the Auto Off feature.
When Auto Off is enabled, NetTool automatically
turns itself off if no key is pressed after 10 minutes
elapses. This helps to conserve the tester's battery
power.
2-2
•
Adjust the display contrast.
Select Contrast and then select
contrast or
•
Set the time and date.
To supply a date and time:
1.
afq42s.bmp
2.
3.
to decrease the
to increase the contrast.
In the first field, press the Up
arrow key to select the desired number.
Press the Right arrow key to advance to
the next position.
After the desired time and date are
displayed, press SELECT.
Notes
The format for time is
hour:minutes:seconds. The format for
the date is month:day:year.
The clock does not self adjust for local
time zones changes. NetTool Blaster
allows you to set the time for NetTool
and even synchronize it with the PC
clock (check NetTool Blaster's Help for
details).
or Down