Tracking Protocols - Fluke Network Tester User Manual

Tracking Protocols

You can also view protocol information by
selecting Protocols from the Main menu.
To find out what protocols are associated with a device or
running on the network, do the following:
1. Display the Protocols screen (Figure 4-5):
Figure 4-5. Protocols Screen
The Protocols screen lists groups of protocols
present on the network. This information can help you
find out if there are any protocol configuration
mismatches. See Table 3-1 for a list of the protocols
that NetTool can discover.
Note
afq20s.bmp
Troubleshooting a Network Device
Verifying a Device's Configuration
The network icon
a protocol group to indicate that there are protocols of
that type running on the network. Note that some
protocols also display the PC icon
that NetTool sees them on both the PC and the
network sides.
2. To view detailed information for a particular protocol
group, move the cursor to its name, then press
SELECT.
For example, if you select IP Protocols, the IP
Protocols screen (Figure 4-6) is displayed:
Figure 4-6. IP Protocols Screen
All of the IP protocols NetTool sees are listed on this
screen.
appears next to the name of
, which means
ahn15s.bmp
4
4-5