Surface Operation; Surface Burners; Oven Light - Wolf R304 Use & Care Manual

SURFACE OPERATION

Sabbath
This appliance is certified by Star-K to meet strict religious
regulations in conjunction with specific instructions found
on www.star-k.org.

Oven Light

WARNING
Verify power is disconnected from electrical box before
replacing light bulb.
Allow oven to cool completely, then unscrew the light lens
and remove the light bulb by unscrewing it from the socket.
Replace with a 40-watt halogen bulb. Refer to the illustra-
tion below.
LIGHT
LENS
Light bulb replacement.

Surface Burners

The dual-stacked burner design combines all burner parts in
one assembly. The burner cap must be seated flatly on the
burner. Refer to the illustration below.
To light a burner, push and turn the corresponding control
knob counterclockwise to HI. The igniter will begin to click
until burner is lit. Once lit, continue to turn knob counter-
clockwise to desired setting.
To select a simmer setting, turn control knob to the detent
at the lowest setting. Push and continue to turn counter-
clockwise. The flame will transition to the second tier on
the burner cap. Continue to turn knob to desired simmer
setting.
During a power outage, surface burners can be lit manually.
Turn knob to HI and light using a multi-purpose lighter.
CAUTION
Never leave pans on a high setting unattended. Be
careful when cooking food in fat or grease; it can
become hot enough to ignite.
BURNER IGNITER
CAP
SEALED BURNER
Dual-stacked burner.
|
wolfappliance.com 9