Assembly Instructions - Fitness Quest 284 Owner's Manual

Occasionally our products contain components that are pre-lubricated at the factory. We recommend
that you protect flooring, or anything else the parts may contact, with newspaper or cloth.
PLEASE READ ALL INSTRUCTIONS CAREFULLY BEFORE ASSEMBLING.
Tools Required (included):
M5 Allen Wrench
Multi Hex Tool with Phillips Screwdriver
Wrench
STEP 1 – Rear Foot Tube Installation
Attach the two 3/8" x 70mm Carriage Bolts,
3/8" Curved Washers and 3/8" Acorn Nuts
to the Rear Foot Tube.
Note: Make sure indentations face down
on Rear Foot Tube.
crank
shaft
left pedal
with strap
Figure 2 - Install Foot Pedals

ASSEMBLY INSTRUCTIONS

IMPORTANT
NOTE: All location references, such as front, rear, left or right,
made in these instructions are from the user being
right pedal
with strap
shaft
on the unit and facing forward.
3/8"
acorn
nut
3/8"
curved
washer
rear
foot tube
3/8" x 70mm
carriage bolt
Figure 1 - Install Rear Foot Tube
STEP 2 – Foot Pedal Installation
Thread Shafts of Pedals Right and Left into
Crank and tighten with wrench.
Note: Pedals are marked Right and Left. Right
Pedal threads clockwise, Left Pedal threads
counter clockwise.
5