Assembly - Fitness Quest Edge 491pr Owner's Manual

NOTE: Occasionally our products contain components that are pre-lubricated at the factory.
We recommend that you protect flooring, or anything else the parts may contact, with
newspaper or cloth.
ASSEMBLY - Foot Tube
PLEASE READ ALL INSTRUCTIONS CAREFULLY BEFORE ASSEMBLING.
FIGURE 1
Step 1. Remove the two M8 x 1.25 x 60 CAR-
RIAGE BOLTS (1), M8 WASHERS (4)
and M8 x 1.25 CAP NUTS (5) from the
FRONT FOOT TUBE (2).
Step 2. Attach FRONT FOOT TUBE (2) to front
of FRAME (3) with hardware removed
in Step 1. Make sure to insert BOLTS
through "square holes" first.
5
M8 x 1.25
CAP NUT
4
M8
WASHER
3
FRAME
IMPORTANT
M8 x 1.25 x 60
CARRIAGE BOLT
9
SUPPORT
TUBE
5
M8 x 1.25
CAP NUT
M8
WASHER
8
REAR
FOOT
TUBE
1
M8 x 1.25 x 60
CARRIAGE BOLT
5
5
M8 x 1.25
CAP NUT
1
2
FRONT
FOOT
TUBE
FIGURE 2
Step 3. Remove the two M8 x 1.25 x 60 CAR-
RIAGE BOLTS (1), M8 WASHERS (4)
and M8 x 1.25 CAP NUTS (5) from the
REAR FOOT TUBE (8).
Step 4. Insert two M8 x 1.25 x 60 CARRIAGE
BOLTS (1) through "square holes" in
4
REAR FOOT TUBE (8), FRAME (3)
and SUPPORT TUBE (9) and fasten
with M8 WASHERS (4) and M8 x 1.25
CAP NUTS (5).
NOTE: It will be difficult to attach
NUTS, but they will fit. DO NOT
tighten these NUTS until you
have completed Step 9.
FIGURE 2
4
M8
WASHER
3
FRAME
FIGURE 1