Operation Example 3; Operation Example 2 - Mitsubishi Electric DX-TL950E Installation And Operation Manual

Operation examples (continued)
7) <TIMER PROGRAM> screen setting (
44,45 ).
• PROGRAM NO.1 : "SPL", "08:00", "15:00", "A", "OFF".
• PROGRAM NO.2 : "SPL", "15:00", "20:00", "B", "OFF".
• PROGRAM NO.3 : "SAT", "08:00", "17:00", "B", "OFF".
• PROGRAM NO.4 : "SUN", "08:00", "17:00", "B", "OFF".
• PROGRAM NO.5 : "HOL", "08:00", "17:00", "B", "OFF".
• SPL : "MON - FRI".
<TIMER PROGRAM>
DW
1 SPL
2 SPL
3 SAT
4 SUN
5 HOL
6 ---
7 ---
8 ---
>> SPL
When completed with all settings above and after clear-
ing the menu screen, press the TIMER button. The unit
will switch to the timer mode.

Operation example 3

This example illustrates the procedure for using Pre-alarm
recording, Alarm recording, Emergency recording with nor-
mal recording in Timer record mode.
< Operation >
• REC MODE C (pre-alarm recording, alarm recording and
emergency recording with all cameras) is set to Monday ~
Friday from 08:00 to 15:00 and REC MODE D (pre-alarm
recording, alarm recording and emergency recording with
camera number "
1
set to 15:00 ~ 08:00 of the following day.
• On weekends, REC MODE D (pre-alarm recording, alarm
recording and emergency recording with camera number
" ", " ", " ", "
3
1 2
08:00 of the following day.
08:00
From Monday
REC MODE C
to Friday
08:00
Saturday and
Sunday
< Setting >
1) Set 1) ~ 3) of "Operation example " 1 " previous.
2) <REAR TERMINAL SETTINGS> screen setting (
page 51).
• EMERGENCY REC DURATION : "20M".
<REAR TERMINAL SETTINGS>
MODE OUT 1
MODE OUT 2
MODE OUT 3
MODE OUT 4
MODE OUT 5
KEY SOUND
BUZZER
REMAIN HDD
CALL OUT SETTINGS
>>EMERGENCY REC DURATION
••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••
62
see pages
P2
START END MODE MD
08:00 15:00 A OFF
15:00 20:00 B OFF
08:00 17:00 B OFF
08:00 17:00 B OFF
08:00 17:00 B OFF
--:-- --:-- ---- -
--:-- --:-- ---- -
--:-- --:-- ---- -
MON-FRI
", " ", " ", " ", " " and "
3
2 7 8
", " " and " " ) is set to 08:00 ~
7 9
8
15:00
REC MODE D
REC MODE D
OFF
OFF
OFF
OFF
OFF
ON
OFF
MAIN-10%
20M
3) Set each item in the <MOTION DETECTION SET-
TINGS> screen for all cameras (
<MOTION DETECTION SETTINGS>
>>SELECTION CAMERA NO.
DETECTION MASK SETTING
SENSITIVITY
MOTION THRESHOLD
TEST MODE
4) <TIMER PROGRAM SETTINGS> screen setting (
see pages 44-46).
• SELECTED PATTERN : "P3".
• ALARM REC DURATION : "5M".
<TIMER PROGRAM SETTINGS>
SELECTED PATTERN
HOLIDAY SETTING
REC MODE A
REC MODE B
REC MODE C
REC MODE D
>>ALARM REC DURATION
5) <REC MODE C> screen setting (
• MOTION DET REC : "ALARM"
• PRE ALARM REC : Set desired pre-alaem recording time.
<REC MODE C>
ALARM SETTING
RECORD SETTING
") is
9
PRE ALARM REC
>>MOTION DET REC
6) <ALARM SETTING C> screen setting (
46).
• All cameras ( " 1 " ~ " 9 " ).
• TRIGGER : MD/EXT.
• EMR : All cameras ( " 1 " ~ " 9 " ) is setting.
Next day
08:00
<ALARM SETTING C>
<ALARM SETTING C>
ALARM
Next day
1
08:00
2
3
4
5
6
7
8
>>9
EMR
see
7) <RECORD SETTING C> screen setting (
46).
• Camera selection during alarm recording : "ALARM CH".
• All cameras ( " 1 " ~ " 9 " ).
• PPS, GRADE, A-PPS, A-GRADE : Set desired interval
and picture quality for each camera.
When "0S" is selected, the pre-alarm recording
is inoperable.
see pages 39,40).
1
HIGH••<<<LOW
5
P3-SET
5M
see page 46).
( S ) S
ALARM
ALARM CH
RECORD CAMERA TRIGGER
1
-------- MD/EXT
2
- ------- MD/EXT
3
-- ------ MD/EXT
4
--- ----- MD/EXT
5
---- ---- MD/EXT
6
----- --- MD/EXT
7
------ -- MD/EXT
------- - 8 MD/EXT
9
-------- MD/EXT
1 2 3 4 5 6 7 8 9
see page
see page