Alarm Recording Connection; Connections; Connecting With Analog Video Recorder - Mitsubishi Electric DX-TL950E Installation And Operation Manual

Connections

Alarm Recording Connection

The diagram below shows an example of con-
Example :
nection for alarm signals corresponding to camera
number 1. (In the case of ALARM SETTING of default
setting.)
OUTPUT B OUT AUDIO
GND
ALARM SWITCH

Connecting with analog video recorder

This unit is equipped with video output (RCA) and audio
output (RCA) connectors on the front and OUTPUT A S(Y/
C), OUTPUT A VIDEO (BNC) and AUDIO OUT (RCA) con-
nectors on the rear. Video signals can be simultaneously
outputted from the video output connector on the front and
the OUTPUT A VIDEO/S(Y/C) connector on the rear. In
the same manner, audio signals can be outputted in simul-
taneously from the audio output connector on the front and
AUDIO OUT connector on the rear. By connecting an ana-
log video recorder to these terminals, recorded contents
can be copied.
Make sure to turn off this unit when connecting with
peripheral recording devices.
••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••• Connections
16
(continued)
ALARM IN
MIC
RESET
IN
RESET