Major Operations And Their Functions; Rear View - Mitsubishi Electric DX-TL950E Installation And Operation Manual

Major operations and their functions (continued)
Rear View (continued)
1
ON
MAIN
OFF
~
AC IN
5
REC terminal
Input terminal to start recording. Not available dur-
ing timer recording.
EMERGENCY terminal
Input terminal initiating immediate shift to EMER-
GENCY recording mode compulsorily.
MODE OUT 1 ~ MODE OUT 5 terminals
Output terminal to indicate the unit's current mode.
Select the unit's condition by MODE OUT 1 ~ MODE
OUT 5 setting in the <REAR TERMINAL SETTINGS>
menu.
CALL OUT terminal / CALL OUT GND terminals
This is the ISOLATION output terminal. Information
that can be transmitted externally consists of CALL
OUT settings made on the <REAR TERMINAL SET-
TINGS> menu screen as well as fixed output set-
tings.
DC 12V OUT terminal
Will only output when the MAIN switch is ON. The
maximum electric current is 350mA.
12. RS-232C connector
This connector is used to connect to host device with
RS-232C connector. This unit can be controlled by
another device through this connector.
13. ETHERNET connector
Use a 10BASE-T cable to connect to the Ethernet
terminal. Please use the cable adapted to 10BASE-
T. DUPLEX MODE is HALF DUPLEX.
RECEIVE indicator
Illuminates when the unit is receiving a signal.
SEND indicator
Illuminates when the unit is transmitting a signal.
•••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••• Beginning
14
2 3
1 2 3
VIDEO
Y/C
1 2 3
OUTPUT A
ALARM IN
MIC
RESET
OUTPUT B OUT AUDIO IN
RESET
GND
9 10
6 7 8
4 CAMERA IN 5 6 7
4 CAMERA OUT 5 6 7
RS-232C
RS-232C
12
11
4
8 9
8 9
ETHERNET
RECEIVE SEND
13